Nortel Networks Meridian M3902 - Manual (Page 36)

36
While on an active call
If the transferred call is not
answered, your telephone rings:
1. Lift the handset .
2. Press the Transfer Key and repeat the
transfer (to a different DN).
Note: If you transfer a call to a person and
they pick up the line while you are still on
the line, press the Goodbye Key to
complete the transfer. Check with your
network administrator to determine the
time interval of your recall timer.
Use Attendant Recall
The Attendant Recall feature allows you to contact an attendant while on a call
and connect the call to the attendant.
To contact the attendant while on a
call:
1. Press the Attendant Recall Key
while on a call.
Stay on the line until the attendant
answers.
/ 2. Press the Goodbye Key.
The caller remains connected to the
attendant.
Note: On the Meridian SL-100, the
Attendant Recall Key is not available; use
the Transfer Key to connect a call to the
attendant.
Use Call Park (M3902)
The Call Park feature allows a call to be held temporarily and to be retrieved from
any telephone. You can park an incoming call and page the called party. Call
Park can also be used on outgoing calls. When you use Call Park, you do not tie
up a line. Your network administrator can set up a System Park Extension where
most calls are automatically parked.
If configured network-wide, Call Park can be used across networks.
Trans
AttRecall
Goodbye