Nautique 230 User Manual
Page 136
4-60
Section 4
NavLight
Enabling NavLight allows the unit to automatically display in Night
View when the NavLight switch on the console is flipped to ‘On’.
You can still toggle between Day and Night View through the soft
key commands.
Brightness
You can set the brightness control by using the UP and DOWN soft
keys to change the settings in 5% increments until the desired
brightness is achieved.
Units
When activated, allows you to select how units are displayed by
using the UP and DOWN virtual buttons to select:
• US Std (US Standard)
• Metric KPa
Video
Specify how video will be displayed from the following choices:
• Disable Video
• Enable Half Screen Mode
• Enable Full Screen Mode
• Enable Full and Half Screen Mode
Stereo Timeout
Select how long the Clarion Audio screen is displayed after no
activity before returning to the previous screen. Options are 5
through 40 seconds.
Minimum Depth
You can choose the depth that you would like to reach before the
depth alarm sounds.
Depth Buzzer
Choose whether you want the alarm “Enabled” or “Disabled.” If
alarm is disabled, the buzzer will not sound even when you enter
water that is shallower than the “Minimum Depth” setting.
V-Drive Sec 4_2010.qxp:Naut Air Sec 4.qxd 7/22/09 1:45 PM Page 60