Nortel Networks 4500 Series - Manual (Page 35)

35
.
SFP specifications
This section provides technical specifications for the supported small
form factor pluggable (SFP) models. Use this information to aid in proper
network design.
The specifications given in this section meet or exceed those specified in
the applicable IEEE standards, where they exist.
In these specifications, unless otherwise noted, receiver sensitivity is
defined as the minimum average input optical power for which the receiver
is guaranteed to meet the bit error rate (BER) of 10
-12 .
Navigation
•
“SFP labels” (page 35)
• “General SFP specifications” (page 36)
•
“T1 SFP specifications” (page 36)
•
“1000BASE-T SFP specifications” (page 39)
• “1000BASE-SX (LC) SFP specifications” (page 40)
• “1000BASE-SX (MT-RJ) SFP specifications” (page 41)
•
“1000BASE-LX SFP specifications” (page 41)
•
“1000BASE-XD CWDM SFP specifications” (page 42)
• “1000BASE-ZX CWDM SFP specifications” (page 43)
• “1000BASE-SX DDI SFP specifications” (page 43)
•
“1000BASE-LX DDI SFP specifications” (page 44)
• “1000BASE-BX DDI SFP specifications” (page 44)
SFP labels
The Nortel label on a typical SFP contains a Nortel serial number, a bar
code, a manufacturer’s code, an interface type, and a part number.
Nortel Ethernet Routing Switch 4500 Series
Installation — SFPs and XFPs
NN47205-301 02.01
20 October 2008
Copyright © 2007-2008 Nortel Networks
.