Nortel Networks M2216ACD - Manual (Page 7)

6
Making calls quickly and easily
Ring Again
If you receive a busy tone or the person does not answer when trying to reach
someone in your office or private network, Ring Again automatically redials that
number and lets you know when that person is free, or that the person has used his
telephone.
To use Ring Again:
¶
1. You dial a DN and receive a busy tone or
no answer. Press Ring Again .
2. Replace the handset or press Release .
When the number you want to reach is free, or
the person has re-used his set, you hear the
Ring Again signal.
3. Lift the handset or press a DN Key.
¶
4. Press Ring Again to automatically redial
the number.
To cancel Ring Again:
¶
Press Ring Again .
Stored Number
The Stored Number feature allows you to store a single telephone number that you can
dial quickly. You can easily change the stored number.
To store a number when you're not
on a call:
º
1. Without lifting the handset, press Stored
No .
2. Dial the number.
º
3. Press Stored No again. Any number
previously stored is replaced.
To store a number when you're on a
call:
º
After you dial the number, press Stored No .