NETGEAR ProSafe SSL312 - Manual (Page 55)

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Setting Up User and Group Access Policies 4-9
v1.1, November 2006
You can set the inactivity timeout at the user, group and global level. Set the timeout as 0 in the
user and group configuration to use the global timeout setting. If multiple timeout settings are
configured, the user timeout setting will take precedence over the group timeout and the group
timeout will take precedence over the global timeout.
The maximum timeout setting is 2 32 or over 100,000 minutes, although setting the timeout to 0
on the Global Settings page disables the inactivity timeout (if 0 is also configured as the
inactivity timeout for the user and group).
Defining and Editing Group Policies
With group access policies, all traffic is allowed by default. You can create additional allow and
deny policies by destination address or address range and by service type.
Figure 4-7