Nortel Networks COOLPIX S5100 - Manual (Page 42)

30
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
M
o
de
Using the Flash
The flash mode can be set to match the shooting conditions.
• When
ISO sensitivity is set to Auto, the flash has a range of 0.5-6.0 m (1 ft.
8 in.-19 ft.) at the maximum wide-angle zoom position and a range of 0.7-2.5 m
(2 ft. 4 in.-8 ft.) at the maximum telephoto zoom position.
Setting the Flash Mode
1
Press the multi selector m (flash mode).
The flash mode menu is displayed.
2
Press the multi selector H or I to choose the
desired mode and press the k button.
The icon for the selected flash mode is displayed.
When U (auto) is applied, D is only displayed for a
few seconds, regardless of
Photo info settings (A 126).
If a setting is not applied by pressing the k button
within a few seconds, the selection will be canceled.
U Auto
Flash fires automatically when lighting is dim.
V
Auto with red-eye reduction
Reduce “red-eye” in portraits (
A 31).
W
Off
Flash will not fire even when lighting is dim.
X
Fill flash
Flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and
backlit subjects.
Y
Slow sync
U (auto) is combined with slow shutter speed.
Suited to evening and night portraits that include background scenery.
Flash illuminates main subject; slow shutter speeds are used to capture
background at night or under dim lighting.
Flash mode
9