Nortel Networks COOLPIX S5100 - Manual (Page 142)

130
Setup Menu
Basi
c Came
ra Setup
Motion Detection
Enable motion detection to reduce the effects of subject movement and camera
shake when shooting still images.
The current motion detection setting can be confirmed in the camera monitor
with shooting (
A 6, 23). The motion detection icon turns green when the camera
detects camera shake and increases shutter speed. When
Off is selected, no icon is
displayed.
d button M z (Setup menu) (A 121) M Motion detection
U Auto (default setting)
When the camera detects subject movement or camera shake, the ISO sensitivity
and shutter speed are automatically increased to reduce blurring.
However, motion detection does not function in the following situations.
• When the flash fires
• In A (auto) mode, when
ISO sensitivity (A 43) is locked
• In A (auto) mode, when
Continuous is set to Multi-shot 16 (A 42)
• In the following scene modes:
Sports (A 55), Night portrait (A 55), Night
landscape (A 57), Fireworks show (A 60), and Backlighting (A 60) scene
mode
• When subject tracking mode is selected
k Off
Motion detection is not enabled.
B
Notes on Motion Detection
• Motion detection may be unable to completely eliminate the effects of subject movement and
camera shake in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The images captured using motion detection may be somewhat “grainy” in appearance.