Nortel Networks COOLPIX S5100 - Manual (Page 30)

18
First Ste
p
s
Setting Display Language, Date, and Time
When the first time the camera is turned on, the language- selection screen and
the date and time setting screen for the camera clock are displayed.
1
Press the power switch to turn on the camera.
The power-on lamp (green) will light, and then the
monitor will turn on (the power-on lamp turns off when
the monitor turns on).
2
Press the multi selector H, I,
J, or K to choose the desired
language and press the k
button.
3
Press H or I to choose Yes and press the k
button.
To cancel setting the date and time, press
H or I to
select
No.
4
Press J or K to choose your home time zone
(A 125) and press the k button.
Multi selector
Yes
No
Set time and date?
Date
Cancel
Back
L o n d o n
C a s a b l a n c a
D
Daylight Saving Time
If daylight saving time is in effect, press H to enable the daylight
saving time function while setting the region in step 4.
When the daylight saving time function is enabled, W is displayed
at the top of the monitor. Press
I to disable the daylight saving
time function.
Back
L o n d o n
C a s a b l a n c a