Nokia 6275i - Manual (Page 77)

O r g a n i s e r
67 Copyright © 2006 Nokia. All rights reserved.
3. Enter a note for the timer,
and select Start .
and the timer (in hh:mm:ss
format) appear in standby mode when
the countdown timer is running.
When the time runs out, your phone
sounds an alarm, vibrates, and flashes
its lights. If you are in standby mode,
select Restart or Exit . If you are not in
standby mode, press any key during the
alarm to stop the timer.
After 60 seconds the timer alert
expires automatically. Select Exit or
press the end key to clear the timer
note.
To change the time:
1. Select Menu > Organiser > Timer >
Change time .
2. Enter the new time, and select OK .
3. Leave the note as it was, or enter a
new note, and select Start .
To stop the timer before the alarm
sounds, select Menu > Organiser >
Timer > Stop timer .
Interval timer
The interval timer in your device allows
you to store multiple interval timers.
You can define and store up to 10
timing periods for each interval timer.
Once at least one interval timer is set
and stored, you can select the interval
timer and one of the stored intervals
for that timer. When the selected
interval expires, your phone sounds an
alarm, vibrates, and flashes its lights.
To set an interval timer, do the
following:
1. Select Menu > Organiser > Timer >
Interval timer .
2. Select Add new timer . This option
only appears if you have already
created an interval timer.
3. Enter a name for the timer,
and select Save .
4. Enter a name for the first timer
period, and select Save .
5. Enter the desired time interval,
and select OK .
6. Select an existing stored period
and Edit period , Add period , Delete
period , or Start timer .