Nokia 6275i - Manual (Page 53)

S e t t i n g s
43 Copyright © 2006 Nokia. All rights reserved.
Date
Select Menu > Settings > Time and
date > Date > Show date or Hide date ,
Set the date , Date format , or Date
separator .
Date and time auto-update
Auto-update is a network service.
See “ Network services ”, p. viii . If your
network operator supports this feature,
you can allow the digital network to
set the clock, which is useful when you
travel to another network or time zone.
Select Menu > Settings > Time and
date > Auto-update of time > On ,
Confirm first , or Off .
If you use the Auto-update of time
option while outside the digital
network, you may be prompted to
enter the time manually. Network time
replaces the time and date when you
reenter your digital network.
If your battery has been removed or
has discharged outside the digital
network, you may be prompted to
enter the time manually (when the
battery is replaced or recharged,
and you are still outside of the digital
network).
■ Call settings
Anykey answer
Anykey answer enables you to answer
an incoming call. Briefly press any key
except the right selection or end key.
In standby mode, select Menu >
Settings > Call > Anykey answer > On
or Off .
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in a
fast busy signal when you dial.
With automatic redial activated,
your device redials the number
(number of times is specified by the
network), and notifies you when the
network is available. In standby mode,
select Menu > Settings > Call >
Automatic redial > On or Off .
Speed dialling
To activate or deactivate Speed
dialling, select Menu > Settings >
Call > Speed dialling > On or Off .
Automatic service update
Your device is capable of receiving
updates to wireless services sent to
your device by your network operator.
In standby mode, select Menu >
Settings > Call > Auto-service
update > On or Off .