Nokia 6275i - Manual (Page 57)

S e t t i n g s
47 Copyright © 2006 Nokia. All rights reserved.
DTMF tones are sent during an active
call. You can send them manually from
your device keypad, or send them
automatically by saving them in your
device.
Set type
In standby mode, select Menu >
Settings > Phone > DTMF tones >
Manual DTMF tones and one of the
following options:
Continuous —Used to set the tone
sound for as long as you press and hold
a key.
Fixed —Used to send tones of the
duration you specify in the DTMF tone
length option.
Off —Used to turn off tones. No tones
are sent when you press a key.
Set length
You can specify DTMF-tone length for
the Fixed option. In standby mode,
select Menu > Settings > Phone >
DTMF tones > DTMF tone length >
Short (95 ms) or Long (350 ms).
Start-up tone
You can select to have a start-up tone
when you first turn on your device.
In standby mode, select Menu >
Settings > Phone > Start-up tone >
On or Off .
Help text activation
Your device displays brief descriptions
for most menu items. When you arrive
at a feature or menu, pause for about
14 seconds, and wait for the help text
to be displayed. If necessary, use the
scroll key to page through the full help
text.
The default setting for help text is On .
However, you can turn help text on or
off. In standby mode, select Menu >
Settings > Phone > Help text
activation .
■ Voice commands and
voice tags
Before using voice tags, note the
following:
• Voice tags are not
language-dependent, but depend
on the speaker’s voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
• Very short names are not accepted.
Use long names, and avoid similar
names for different numbers.