Nokia 6275i - Manual (Page 55)

S e t t i n g s
45 Copyright © 2006 Nokia. All rights reserved.
International prefix
You can store an international dialling
prefix into your device. In standby
mode, select Menu > Settings > Call >
International prefix . In standby mode,
when you enter + (press * twice) at the
beginning of a phone number,
your device automatically inserts the
international dialling prefix that you
have stored after you press the call key.
See “ Insert dialling codes ”, p. 22 .
Data or fax calls
Data and fax calling is a network
service. See “
Network services ”, p. viii .
If your network operator supports this
feature, you can set up the device to
send or receive data and fax calls with
a terminal, such as a PDA or PC,
connected.
For better performance during data
calls, place the device on a stationary
surface. Do not move the device or
hold it in your hand during a data call.
For more information on connectivity,
refer to the PC/PDA Connectivity Guide
which can be downloaded from the
Nokia website at http://www.nokia-
asia.com.
1. In standby mode, select Menu >
Settings > Call > Data/fax calls >
Rcvd. data/fax call and one of the
following options:
Normal —The device receives
incoming calls as usual.
Data calls only —The device receives
only data calls.
Fax calls only —The device receives
only fax calls.
2. When finished with receiving the
fax or data call, repeat steps 1 and
2, and select
Normal .
Data transfer
To view the transmission speed when
sending or receiving data and fax calls.
In standby mode, select Menu >
Settings > Call > Data/fax calls > Data
rate display > Graphic or Off .
Call summary
Your device can display the time spent
on a call when you hang up. In standby
mode, select Menu > Settings > Call >
Call summary > On or Off .
Show call time
To see the call time on the display
screen after each call, select Menu >
Settings > Call > Show call time displ.
> On or Off .
Ringing tone for no caller ID
You can select a different ringing tone
for calls received with no caller ID.
In standby mode, select Menu >
Settings > Call > Ringtone no caller
ID > On or Off .