Nokia 6275i - Manual (Page 65)

S e t t i n g s
55 Copyright © 2006 Nokia. All rights reserved.
Note: The PIN code must be
obtained form your wireless
service provider or network
operator. The PIN code is
typically provided with your
UIM card.
PIN code request
To provide extra security in case your
phone is lost or stolen, enable your
phone to request the PIN code when
powered on.
1. In standby mode, select Menu >
Settings > Security > PIN code
request .
2. Enter the PIN code, and select OK .
3. Select On .
Call restrictions
Select call restrictions to block or allow
numbers for incoming and outgoing
calls. With any numbers entered as
allowed numbers, all those entered as
blocked numbers are ignored. With a
number blocked, the phone blocks any
call from it, and send the caller to the
voice mail.
1. In standby mode, select Menu >
Settings > Security > Call
restrictions .
2. Enter the security code, and select
OK . See “ Security ”, p. 54 .
3. Select the types of calls you want
to restrict:
Restrict sent calls —Set restrictions
on making calls.
Restrict rcvd. calls —Set restrictions
on receiving calls.
4. Select whether to block or allow
numbers:
Blocked numbers —Set the numbers
the phone can only block,
allowing all the rest.
Allowed numbers —Set the numbers
the phone can only call or receive,
blocking all the rest.
5. Select one of these options: Select ,
Add restriction (unavailable with
memory full), Edit (unavailable
with no number added), or Delete
(unavailable with no number
added).
Note: With restricted calls,
you may still call the official
emergency number
programmed into your device.
Security level
Your device can be set to different
security levels to control device use
and memory settings. In standby mode,
select Menu > Settings > Security >
Security level . Enter your security code,
and select OK and one of the following
options:
None —Disable security level
protection.