Nokia 6275i - Manual (Page 64)

S e t t i n g s
54 Copyright © 2006 Nokia. All rights reserved.
Important: To ensure that all
memory card operations are
completed in a controlled
way, do not unplug the
connectivity cable until
Windows notifies you that it
is safe to do so. Uncontrolled
completion or unexpected
disruptions of the memory
card operations may cause
the memory card and the
information stored on it to
become corrupted.
A corrupted memory card
may have to be formatted
before it can be used again.
When a memory card is
formatted, all information on
the card is permanently los
■ Enhancements
Select Menu > Settings >
Enhancements . You can select an
enhancement menu if the phone is or
has been connected to a compatible
enhancement type. Depending on
enhancement, select from the
following options:
Default profile —Choose the profile you
wish to be automatically activated
when a headset, car kit, or loopset is
connected.
Automatic answer —Answer calls
automatically after one ring when a
headset, car kit, loopset, or charger is
connected. Select On or Off .
Lights (for Handsfree or Charger
only)—Choose to keep the phone lights
always on, or to shut off automatically
after several seconds. Select On or
Automatic .
If the Loopset is connected and
recognised through the Pop-Port™
connector, the phone automatically
uses the Loopset .
Text phone (network service)—Connect
to a TTY/TDD device. Check with the
manufacturer of the TTY/TDD device
for a connecting cable that is
compatible with your phone.
Check with your service provider for
availability and description of services.
■ Security
PIN code
The PIN code protects the UIM card
from unauthorised access. The PIN
code can be 4–8 digits in length.
After three successive incorrect
entries, the PIN code is blocked.
You need to enter the personal
unblocking key (PUK) code.
See “ Personal unblocking key (PUK)
code ”, p. 56 .