Voice recorder, Record speech or sound, Equaliser – Nokia 6275i User Manual
Page 49: Activate an equaliser set, Create a custom equaliserset, Create a custom equaliser set

M e d i a
39
Copyright © 2006 Nokia. All rights reserved.
listening to the radio. During the call,
the volume of the radio is muted.
■ Voice recorder
You can record pieces of speech,
sound, or an active call for up to 3
minutes. The recorder cannot be used
when a data call is active.
Record speech or sound
1. Select
Menu
>
Media
>
Voice
recorder
.
2. To start the recording, select the
record virtual button. To start the
recording during a call,
select
Options
>
Record
. While
recording a call, all parties to the
call hear a faint beeping sound
about every 2 seconds. When
recording a call hold the phone in
the normal position near your ear.
3. To end the recording, select the
stop virtual button. The recording is
saved in
Gallery
>
Recordings
.
4. To listen to the latest recording,
select
Options
>
Play last recorded
.
5. To send the last recording using a
Bluetooth technology, or IR, select
Options
>
Send last recorded
.
■ Equaliser
The equaliser enhances the sound
quality when using
Music player
by
amplifying or attenuating frequency
bands. There are five preset equaliser
settings (
Normal
,
Pop
,
Rock
,
Jazz
,
and
Classical
) and two personal
settings.
Activate an equaliser set
Select
Menu
>
Media
>
Equaliser
,
scroll to the desired equaliser setting,
and select
Activate
. Select
Options
>
View
to display the equaliser settings.
Create a custom
equaliser set
1. Select
Menu
>
Media
>
Equaliser
.
2. Highlight a customisable setting,
and select
Options
>
Edit
.
The selected set appears in the
display with the bar on the far left
highlighted. The bars adjust
frequencies, from the lowest (the
far left bar) to the highest (the far
right bar). The higher the indicator
on a particular bar, the more that
frequency is amplified.
3. Scroll to adjust the frequencies.
Select
Save
.
4. To rename the setting, select
Options
>
Rename
, enter a new
name, and select
OK
.
5. To activate the setting,
select
Activate
.