Nokia 6275i - Manual (Page 39)

C o n t a c t s
29 Copyright © 2006 Nokia. All rights reserved.
Delete speed dialling numbers
1. In standby mode, select Menu >
Contacts > Speed dials .
2. Scroll to the entry you want to
delete, and select Options >
Delete > Yes .
■ Voice tags
You can dial up to 25 stored numbers
using voice dialling.
Before using voice tags, note the
following:
• Voice tags are not language-
dependent. They depend on the
speaker’s voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
• Very short names are not accepted.
Use long names and avoid similar
names for different numbers.
Note: Using voice tags may be
difficult in a noisy
environment or during an
emergency, so you should not
rely on voice dialling in all
circumstances.
Assign a voice tag to an
entry
Before you can use voice dialling, you
must first assign a voice tag to the
number.
1. In standby mode, scroll to the entry
in your contacts list to which you
want to assign a voice tag.
2. Select Details > Options > Add
voice tag > Start .
3. Speak clearly into the microphone.
Do not select Quit unless you want
to cancel the recording. The device
automatically stops recording,
and saves and replays the voice
tag.
appears next to commands that
have voice tags assigned.
Dial a number
1. In standby mode, press and hold the
right selection key with the fold
open, or press and hold the voice key
regardless of the fold being open or
closed.
2. When you hear several beeps and
Speak now appears, release the key.
3. Pronounce the voice tag clearly
into the microphone.
When the device finds the voice
tag, Found: appears, and the device
automatically dials the number.
If the device does not locate a
number or recognise the voice tag,
No match found appears.