NEC 5800/320MA - Manual (Page 5)

v Express5800/320Ma: PCI Adapter Guide
Figures
Figure 1-1. PCI Adapter Slot Numbering 1-4
Figure 2-1. Faceplate of the U575 PCI Adapter 2-2
Figure 2-2. RJ-45 Connector 2-6
Figure 2-3. Initial PROSet Dialog Box 2-8
Figure 2-4. Identify Adapter Dialog Box 2-16
Figure 2-5. Setting the Link Speed and Duplex Mode 2-17
Figure 2-6. Verifying Link Speed, Duplex Mode, and Link Activity 2-18
Figure 2-7. Selecting the Type of Team 2-19
Figure 2-8. Selecting Ethernet PCI Adapters for a Team 2-20
Figure 2-9. Assigning Priorities to Ethernet PCI Adapters 2-21
Figure 2-10. Adding a VLAN to a Team 2-22
Figure 2-11. Specifying a VLAN ID and Name 2-23
Figure 2-12. Network Connections Window 2-25
Figure 2-13. Ethernet Team Properties 2-26
Figure 2-14. Internet Protocol (TCP/IP) Properties 2-27
Figure 2-15. Removing an Ethernet PCI Adapter from a Team 2-29
Figure 2-16. Confirmation Message: Removing an Ethernet
PCI Adapter from a Team 2-29
Figure 2-17. Icon for a Missing (Removed) Adapter 2-30
Figure 2-18. Adding an Adapter to a Team 2-31
Figure 2-19. Obtaining the Ethernet Address for a Team 2-33
Figure 2-20. Obtaining the Permanent Ethernet Address of an
Ethernet PCI Adapter 2-33
Figure 2-21. Removing a Team of Ethernet PCI Adapters 2-35
Figure 2-22. Confirmation Message: Removing a Team 2-35
Figure 2-23. Status LEDs on Embedded Ethernet Ports 2-36
Figure 2-24. Network Statistics in PROSet 2-39
Figure 2-25. Network Statistics in ftSMC 2-40
Figure 2-26. PROSet Diagnostics 2-42
Figure 3-1. Faceplate of an Optical Fibre Channel PCI Adapter 3-3
Figure 3-2. LC Connector of a Fibre Channel Optical Cable 3-6
Figure A-1. Removing and Installing Low- and High-Profile Faceplates A-1