NetComm NP2624M User Manual
Page 87
NP2624M User Guide
87
YML827 Rev1
4.2.8.2. Filtering MAC Address
MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the
destination addresses.
In this page users can add /modify /delete a MAC address filter.
Add filter MAC address
1. Press
2. MAC Address: Type the MAC address to filter.
3. Vlan ID: If tag-based (802.1Q) VLAN are set up on the switch, type the VID to
associate with the MAC address.
4. Press Ctrl+A to go back to the action menu line, and then select
configured values.