NetComm NP2624M User Manual
Page 42
42
NP2624M User Guide
YML827 Rev1
Fu:
Force the specific port to be unauthorised.
Fa:
Force the specific port to be authorised.
Au:
The state of the specific port was determined by the
outcome of the authentication.
No:
The specific port didn’t support 802.1x function.
Miscellaneous Configuration
In this page, users can change the default configuration for the 802.1x standard:
Quiet Period:
Used to define periods of time during which it will
not attempt to acquire a supplicant (Default time is
60 seconds).
Tx Period:
Used to determine when an EAPOL PDU is to be
transmitted (Default value is 30 seconds).
Supplicant Timeout:
Used to determine timeout conditions in the
exchanges between the supplicant and authentication
server (Default value is 30 seconds).
Server Timeout:
Used to determine timeout conditions in the
exchanges between the authenticator and
authentication server (Default value is 30 seconds).
Max requests:
Used to determine the number of re-authentication
attempts that are permitted before the specific port
becomes unauthorized (Default value is 2 times).
Reauth Period:
Used to determine a nonzero number of seconds
between periodic re-authentication off the
supplications (Default value is 3600 seconds).