N-Tron 710FX2 - Manual (Page 169)

(Revised 2012-05-01 Page 169 of 170
< DNSServer2 > 192.168.2.11 DNSServer2 >
< Gateway1 > 192.168.2.1 Gateway1 >
< Gateway2 > 192.168.2.2 Gateway2 >
Advanced >
< IPMaps >
-- The DynamicRange is the only IP Map supported. You may have 0 or more. -- >
< DynamicRange >
-- low and high within range of profile -- >
< LowIP > 192.168.2.1 LowIP > -- required -- >
< HighIP > 192.168.2.4 HighIP > -- required -- >
DynamicRange >
IPMaps >
Profile >
DHCPServer >
-- ______________________________________________________________________________________ -- >
-- MAC security -- >
< MACSecurity >
< Mode > learning OR locked Mode > -- Mode must be learning or locked -- >
-- Authorized entries -- >
< Authorized mode ="keep or delete"> -- mode must be "keep" or "delete" -- >
-- mode=delete - delete existing authorized MACs before adding
authorized MACs (default) -- >
-- mode=keep - do not delete existing authorized MACs before
adding authorized MACs -- >
< ValidatePorts > yes OR no ValidatePorts > -- optional -- >
-- Must be yes(default) or no.
If no, invalid ports are ignored. -- >
< Entry >
< MACAddress > 00:07:af:ff:5b:c0 MACAddress > -- 17 character limit -- >
-- MAC is valid on all ports listed in the ports list.
If the ports list is missing, then the MAC is valid on all ports. -- >
< Ports >
< Port >
-- Use PortNumber or PortName -- >
< PortNumber > 4 PortNumber > -- 1 to maximum port for switch -- >
Port >
< Port >
< PortName > TX5 PortName > -- Name of port on switch -- >
Port >
Ports >
Entry >
< Entry >
< MACAddress > 0007af1d6460 MACAddress > -- Example of a MAC with no
delimiters, valid on all ports. -- >
Entry >
Authorized >
MACSecurity >
SystemConfiguration >