N-Tron 710FX2 - Manual (Page 114)

(Revised 2012-05-01 Page 114 of 170
Rate Limiting – Multicast Rate Limit Configuration
The Rate Limiting/Multicast link will display all the ports that are installed in the 710FX2 Series unit and
will list the Multicast Pass Rate Percentage for each port. Multicast Pass Rate Percentage defaults to 100%
on all ports. A Modify button is provided to change these fields.
Note: Unicast packets with destinations not in the ARL table will also be rate limited rather than all being
Flooded.
Following the Modify button on the above example, the administrator can modify the Multicast Pass Rate
Percentage for each and every port.