N-Tron 710FX2 - Manual (Page 149)

(Revised 2012-05-01 Page 149 of 170
CLI Commands, Continued…
Show or Clear the Last System Error
Command Name Syserr
Description Show or clear the last system error
If clear is not supplied, then the last system error is displayed.
Syntax syserr [clear]
Parameters Clear
Clear the last system error.
Example N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
Notes
Show System Information
Command Name Sysinfo
Description Show system information
Syntax Sysinfo
Parameters None
Example N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ N-TRON 700/7000/7500 Series
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model: 710FX2
+ Boot Loader: BL 2.0.5.1 (0x02000501)
+ OS Version: 3.2.1
+ Build Date: Dec 8 2009 at 15:10:57
+ Copyright: Copyright (c) 2008-2009 N-TRON Corp. All rights
reserved.
+
+ Processor: 66 MHz (66000000)
+ SDRAM Size: 16 MB
+ Flash Size: 8 MB
+ File System: 6422528 Bytes, 2907136 Free, 3515392 Used, 0 Bad
+ MAC Address: 00:07:af:fd:64:60
+ IP Address: 192.168.1.214
+ Subnet Mask: 255.255.255.0
+ Gateway: 192.168.1.1
+ Cfg Device: Not connected
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
N-TRON/Admin>
Notes