Eizo RADIFORCE RX211 - Manual (Page 42)

0
8. Specifications
. Specifications
LCD Panel 54cm(21.3 inch), TFT color LDC panel
Surface treatment: Anti-Glare Hard Coating
Surface hardness: 2H
Response Time: 17ms
Viewing Angle Horizontal:170°, Vertical: 170° (CR 10 or more)
Dot Pitch 0.270mm
Horizontal Scan
Frequency Analog 24 ~ 100 kHz (Automatic)
Digital 31 ~ 100 kHz
Vertical Scan Frequency Analog 49 ~ 86 Hz (Automatic) (1200 x 1600: 49 ~ 76 Hz)
Digital 59 ~ 61 Hz, (VGA TEXT: 69 ~ 71 Hz)
Resolution 2M pixels (Portrait: 1200 × 1600 dots (H × V))
Max.Dot Clock Analog: 202.5 MHz, Digital: 162 MHz
Max. Display Color 16.77 million colors
Recommended Brightness 300 cd/m 2 (approx.35%) with color temperature of
between 6500K to 8000K
Display Area(H × V) 324.0mm × 432.0mm (12.8"(H) x 17.0"(V))
Power Supply 100-120/200-240 VAC±10%, 50/60 Hz, 1.1-0.9A
/0.6-0.45A
Power Consumption Max.:
Min.(Normal):
Power saving mode:
Main power off:
115W (With USB load)
105W (Without USB load)
Less than 3W
(for single signal input
without USB load))
0W
Input Connector DVI-D, D-sub mini 15pin
Analog Input Signal (Sync) Separate, TTL, Positive/Negative
Composite, TTL, Positive/Negative
Sync on Green, 0.3 Vp-p, Negative
Analog Input Signal (Video) 0.7 Vp-p / 75 ohms, Positive
Input Signal (Digital) TMDS (Single Link)
Signal registration Analog 45 (Factory preset: 30)
Digital 10 (Factory preset: 0)
Plug & Play VESA DDC 2B / EDID structure 1.3
Environment Conditions Temperature Operating: 0 °C ~ 35 °C (32 °F ~ 95 °F)
Storage: -20 °C ~ 60 °C (-4 °F ~ 140 °F)
Humidity Operating:30 % to 80 % R.H. Non-condensing
Storage: 30 % to 80 % R.H. Non-condensing
Pressure Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
USB Standard USB Specification Revision 2.0
USB ports Upstream port × 1, Downstream port × 2
Communication
Speed 480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Power Supply Downstream: 500 mA for each (Max.)
Classification of Equipment Type of protection against electric shock : Class I
EMC class : EN60601-1-2: 2001 Group 1 Class B
Classification of medical device (MDD 93/42/EEC) :
Class I