Eizo RADIFORCE RX211 - Manual (Page 22)

0
2. Cable Connection and Screen Adjustment
(4) Screen image is smaller or larger than the actual screen images.
Use the adjustment.
Adjustment is needed when the input signal resolution and the resolution now
being displayed are different.
Select and confirm if the resolution now being displayed is the
same as the input resolution. If it is not, adjust the vertical resolution using
the Up and Down Switch and adjust the horizontal resolution using the Right
and Left Switches.
3
. Adjust the output signal range (Dynamic Range) of the signal.
Use the (p. 45) of menu.
This controls the level of output signal range to display the whole color gradation
(256 colors).
[Procedure]
Press the Auto Adjustment Switch on the control panel while displaying the
menu to automatically adjust the range. The screen blanks
for a moment and adjusts the color range to display the whole color gradation of
the current output signal.
Extra image is displayed due to excessive dots.
A part of image is cut due to short dots.