Nortel Networks NN47230-301 - Manual (Page 44)

44 Chapter 3 Using SREM
Field Description
The default value is public.
Note: This field is not editable in this release.
4 Click Create.
SREM will attempt to connect to the network access device. One of
two results follows:
• If SREM connects to the network access device successfully, the
network access device appears in the Device List.
• If SREM cannot connect to the specified device, check the IP
and login information, and click Try Again.
—End—
Deleting a network access device
Use the following procedure to add a new network access device through
SREM.
Step Action
1 Open SREM.
2 Select the network access device you want to delete in the Device
List.
3 Select Edit > Delete.
The network access device disappears from the Device List.
—End—
Grouping network access devices in SREM
Use the following procedure to organize the SREM device list by creating
Sub Networks of network access devices.
Nortel Secure Network Access Switch Software Release 1.6.1
Installing and Using Security and Routing Element Manager (SREM)
NN47230-301 02.01 Standard
1.6.1 16 July 2007
Copyright © 2007, Nortel Networks
.