Installing mcc 3100 for blackberry from a computer, Installing mcc 3100 – Nortel Networks MCC 3100 User Manual
Page 18
Software installation
18
Installing MCC 3100 for BlackBerry from a
computer
Prior to installation, obtain the MCC 3100 for BlackBerry software from
your system administrator.
1.
Connect the BlackBerry to a PC using a Universal Serial Bus (USB)
cable.
2.
Extract the MCC 3100 files to any folder on your computer.
3.
Locate the folder where you extracted the MCC 3100 files. You
require the following files to install the application:
— MCC3100-BB.alx
— MCC3100-BB.cod
— .properties
— xxx.Eula.html
Note: When installing files into the BlackBerry Application Loader,
only add the *.alx files.
4.
Launch the BlackBerry Desktop Manager on your PC by selecting
Start > Programs > BlackBerry > Desktop Manager.
5.
Click Application Loader.
The Application Loader Wizard appears.
6.
Click Next.
If the Desktop Manager detects the communication port, the Device
Application Selection dialog box appears and you can skip to step 8.
Otherwise, the Communication Port Selection panel appears.
7.
Select the appropriate communication port (typically USB) and click
Next.
The Device Application Selection dialog box appears. See
“Application loader wizard file selection” on page 19
.