National Instruments Measure Data Acquisition - Manual (Page 97)

Index
© National Instruments Corporation I-5 Measure Data Acquisition User Manual
multiple SCXI modules and chassis, 3-3
to 3-4
analog output, 3-5
configuration, 3-1
operating modes, 3-1 to 3-2
overview, 3-1
Signal Conditioning Extension for
Instrumentation (SCXI). See SCXI
modules.
Specify interchannel delay option,
Advanced Timing Settings dialog
box, 4-10
Start acquisition on trigger option, Hardware
Digital Trigger dialog box, 4-8
T
Task Description option, DAQ Tasks dialog
box, 2-10
Task Name
Analog Input Configuration dialog box,
2-3, 4-2, 4-6
Analog Output Configuration dialog box,
2-6, 5-1 to 5-2
tasks. See also DAQ Tasks dialog box.
acquisition tasks with VBA, 6-1
adding to DAQ menu, 2-7 to 2-8
configuring
advanced analog output configuration,
5-3 to 5-4
advanced timing settings, 4-10
analog input task, 2-3 to 2-5, 4-2 to 4-7
analog output task, 2-5 to 2-7, 5-1
to 5-3
mode reference, 4-8 to 4-9
timing settings, 4-4 to 4-5
trigger reference, 4-7 to 4-8
managing tasks in workbook, 2-9 to 2-10
saving, 2-8 to 2-9
selecting, 2-1 to 2-3
technical support, D-1 to D-2
terminal block selection guide, SCXI
modules (table), A-7
Timeout (seconds) field, Hardware Digital
Trigger dialog box, 4-8
timing settings, 4-4 to 4-5
Advanced Timing Settings dialog box,
4-10
external scan clock, 4-5
round robin scanning (figure), 4-5
scan clock and channel clock (figure), 4-5
scan rate, 4-5
Trigger button, Analog Input Configuration
dialog box, 4-6
trigger reference, 4-7 to 4-8
troubleshooting, C-1 to C-2
U
uninstalling Measure, 1-3
Updates per second field, Analog Output
Configuration dialog box, 2-6, 5-2
Use external channel clock option,
Advanced Timing Settings dialog
box, 4-10
V
Visual Basic for Applications (VBA)
DAQ function, 6-1 to 6-2
GetDAQErrorMessage function, 6-3
running tasks from, 6-1
voltage limits
analog input
high, 4-3
low, 4-4
analog output
high, 5-4
low, 5-4
voltage reference, external, 5-4
volts, scale for displaying acquired data in,
4-4