National Instruments Measure Data Acquisition - Manual (Page 15)

Chapter 2 Getting Started with Data Acquisition Tasks
Measure Data Acquisition User Manual 2-2 © National Instruments Corporation
Figure 2-1. DAQ Tasks Dialog Box
The DAQ Tasks dialog box manages the I/O operations, or tasks,
that you define with Measure. From this dialog box, you can create
new tasks, edit existing tasks, and run I/O tasks interactively to test
their operation.
3. Select a DAQ device from the Data acquisition device drop-down
listbox at the top of the dialog box. The list of devices available in
the drop-down listbox is taken from the devices that you have
configured. If you have not run the configuration utility yet, refer
to the documentation that came with your DAQ hardware.
4. Click on the AI button under the heading Create a task to display
the Analog Input Configuration dialog box, shown in figure 2-2.