Nortel Networks CALLPILOT 555-7101-215 - Manual (Page 23)

May 2003 702t server description
Part 2: 702t Server Hardware Installation 23
Network requirements
Appropriate networking equipment must be available for both the CLAN
and ELAN.
The CLAN and ELAN must be properly configured for correct CallPilot
operation. To ensure correct configuration, Nortel Networks recommends
that you consult a network specialist.
Remote access connectivity
The RS-232 COM 1 connector on the rear of the 702t server provides the
connection to an external high-speed modem. The modem allows
administrators and technical support personnel to administer the 702t server
from a remote location.
pcAnywhere is used to establish the remote access connection to the server.
ATTENTION
For important considerations about using the ELAN in
your network, see “About the ELAN” in Part 1 of the
CallPilot Installation and Configuration binder.