NETGEAR DGN2000 - Manual (Page 9)

Getting to Know Your Wireless Router 5
Router Side Panel
The side panel of the router has a Wireless On/Off button and a WPS button.
The side panel contains the following elements and provides the following function:
• Wireless On/Off Button. By default, the wireless modem router is set up to work as a
wireless access point. Pressing this button turns the wireless access point feature off and on.
You can also do this through the Wireless Settings screen. For more information, see the
on-line Reference Manual. A link to the Reference Manual is on the Resource CD.
• WPS Button. You can use the Wi-Fi Protected Setup (WPS) feature with clients on the
network that are Wi-Fi certified and WPA capable. See
“Using Push 'N' Connect (WPS) to
Configure Your Wireless Network” on page 23 .
• Factory Default Reset. Press the Wireless On/Off and WPS buttons simultaneously for
6 seconds to reset the router to its factory default settings.
Figure 3
Wireless On/Off WPS