Setting up your router for internet access, Setting up your router for internet – NETGEAR DGN2000 User Manual

Page 21

Text mode
Original mode

Installing Your Router Manually (Advanced, Mac, and Linux Users)

Setting Up Your Router for Internet Access

When configuring your wireless router manually, you must log in to your wireless-N modem
router to set it up initially and to make any changes to your wireless router’s settings later.

To access the router:

Type http://192.168.0.1 in the address field of your browser, and then click Enter.

A login window similar to the one shown in

Figure 12

will display.

The factory default state is reset when you press the Wireless On/Off and WPS
buttons on the side panel of router simultaneously. See

“Restoring the Default

Configuration and Password” on page 36

for more information.

You can also enter either of these addresses to connect to your wireless router:

http://www.routerlogin.net or http://www.routerlogin.com.

Figure 11

Figure 12