Default configuration – NETGEAR DGN2000 User Manual

Page 44

Technical Specifications

Default Configuration

You can use the Wireless On/Off and WPS buttons that are located on the side of your router to
reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Wireless On/Off and WPS buttons simultaneously for 6 seconds. Your router will
return to the factory configuration settings that are shown in the table below.

Interface Specifications

LAN:

10BASE-T or 100BASE-Tx, RJ-45

WAN:

ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite

Feature

Default Behavior

Router Login

User Login URL

http://www.routerlogin.net or http://www.routerlogin.com

User Name (case sensitive)

admin

password

Internet Connection

WAN MAC Address

Use Default address

WAN MTU Size

1500

Port Speed

AutoSense

Local Network (LAN)

Lan IP

192.168.0.1

Subnet Mask

255.255.255.0

RIP Direction

None

RIP Version

Disabled

RIP Authentication

None

DHCP Server

Enabled

DHCP Starting IP Address

192.168.0.2

DHCP Ending IP Address

192.168.0.254

DMZ Disabled

Time Zone

GMT