Navman M-Nav 650 - Manual (Page 70)

70
NAVMAN
Speed
The Safety settings allow you to set safety-related warnings.
1. From the Preferences menu, select Safety Alerts, then press
OK. The Safety Alerts screen will display.
2. On the Safety Alerts screen, select Safety, then press OK. The Safety screen will display.
3. Complete the following:
If you want to... Then...
enable a warning chime
when travelling at or above
a designated speed select the speed in the Speed box using the left and right buttons
on the
8-way toggle. Select Save, then press OK.
The Safety alerts screen will display.
Note: The GPS signal alert will be active
when a Speed alert is selected.
enable a visual warning if
the Main Menu screen is
accessed in a moving vehicle select the Warn driver when operating check box, then press OK.
enable a warning chime and
visual warning when the
GPS signal has been lost select the Warn when GPS lost check box, then press OK.
Note: The GPS signal alert will be active
when a Speed alert is selected.
4. Use the 8-way toggle to select Save, then press OK. The Main Menu screen will display.