Nortel Networks 2000 - Manual (Page 10)

Chapter 1 Application Gateway Overview
Power
2 Application Gateway Hardware Installation Guide
Power
The power cord connector is located on the left side on the back of the
Application Gateway. When the power LED, on the front panel, is
illuminated, the power is on.The power control button is on the front
panel. The power supplies are factory installed and not customer
replaceable.
Attention: This server is suitable for use on an IT power distribution
system, whose maximum phase to phase voltage is 240 V under any
distribution fault condition.
The following table lists the current RoHS and non-RoHS cords for the IP
Phone Global Power Supply.
CPC
(RoHS)
PEC (RoHS)
CPC
(Non-RoHS) PEC
(Non-RoHS)
Description
N0089601 NTYS17AAE6 N0023000 N0023000 IP Phone Global
Power Supply
(200x and 1100)
(RoHS)
N0089603 NTYS14AAE6 N0066566 NTYS14AA Standard IEC Cable
- North America
N/A N/A A0781922 NTTK15AA Standard IEC Cable
- Australia / NZ
N0114986 NTTK16ABE6 A0506456 NTTK16AB Standard IEC Cable
- Europe
N0109787 NTTK17ABE6 A0506461 NTTK17AB Standard IEC Cable
- Switzerland
N0109881 NTTK18ABE6 A0506464 NTTK18AB Standard IEC Cable
- UK
N0109788 NTTK22ABE6 A0506468 NTTK22AB Standard IEC Cable
- Denmark
N/A N/A A0814961 A0814961 Standard IEC Cable
- Argentina
N0118951 NTTK26AAE6 None None Standard IEC Cable
- Japan