Nortel Networks 1120 - Manual (Page 88)

Incoming calls
88
Using Call Waiting
The Call Waiting feature alerts you to an incoming call by producing a
tone. It also puts the current call on hold while you answer the new call.
To answer an incoming call while on another call:
To return to the first IP Phone call:
3. Dial the DN of the IP Phone that is
ringing (and that is not in your call pickup
group). If the pickup DN or group
number is invalid (an overflow burst tone
sounds and the screen displays
Goodbye and try again), press the
Goodbye key.
1. When the incoming call tone sounds,
press the
Hold key to put the current call
on hold.
Note: If Automatic Hold is enabled, it is
not necessary to press the Hold key.
2. Press the Call Waiting key.
1. Choose one of the following:
— Press the Hold key to put the
second call on hold.
— Press the Goodbye key to end the
second call.
(Hold)
CallWait Z
or
(Hold)
(Goodbye)