Nortel Networks 1120 - Manual (Page 46)

Configuring Telephone Options
46
This reordering is also performed when you scroll through your Callers
List. To configure area codes, press the
Services key, select Telephone
Options , and select Call Log Option .
To configure default area codes (maximum of three):
1. Press the Up/Down navigation keys to
scroll and highlight Area Code Setup .
2. Press the Enter key.
3. Press the Up/Down navigation keys to
scroll and highlight one of the following:
— Area Code # 1
— Area Code # 2
— Area Code # 3
4. Press the Enter key.
5. Use the dialpad to enter the number at
the prompt.
6. Choose one of the following:
— Press the Select soft key to save the
configuration.
— Press the Cancel soft key to keep
the existing configurations.
or
Select Cancel