Nortel Networks 1120 - Manual (Page 54)

Configuring Local Menu options
54
Configuring Local Menu options
Note 1: Many of the options discussed in this section are for
administrator use only. Do not make any changes unless instructed
by an administrator.
Note 2: Your system administrator can establish a password for the
Local Tools menu. When the password is enabled, a password
prompt dialog box appears when you attempt to access this menu. If
this happens, contact your system administrator.
Your IP Phone 1120E has both local and server-based options. Press the
Services key twice to access the Local Tools menu, which is organized
into the following submenus:
• “Using the 1. Preferences submenu” on page 56
• “Using the 2. Local Diagnostics submenu” on page 59
• “Using the 3. Network Configuration menu” on page 60
• “Using the 4. Lock Menu” on page 60
If a menu entry has a number in front of it, you can select that entry by
pressing the associated key on the dialpad. For example, when you are in
the Local Tools menu, you can access
2. Local Diagnostics by pressing
the 2 key on the dialpad.
The function of some keys on the IP Phone varies depending on the
situation. The key functions in the menus are described in Table 5.
Table 5: Navigation key functions in menus (Part 1 of 2)
Key Function
Down arrow keys Move the highlight down
Up arrow keys Move the highlight up
Right arrow key Select the current menu item
Left arrow key Close the menu
Enter key Select the current menu item