Nortel Networks 1120 - Manual (Page 82)

While on an active call
82
Using Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call
from any IP Phone. Using Call Park does not tie up a line. When
configured network-wide, Call Park can be used across networks. A
System Park extension can be configured to automatically park most
calls.
To park a call on the System Park DN or your own DN:
To park a call on a DN other than the System Park DN or your own
DN:
During an active call, press the Park soft
key twice.
Note: By default, the call is parked on
your DN unless a
System Park DN is
enabled to automatically park calls on
the system.
1. Press the Park soft key.
2. Dial the DN where you want to park the
call.
3. Press the Park soft key.
Park Park
Park
Park