Nortel Networks 1120 - Manual (Page 83)

While on an active call
83
To park a call using the SPRE code or FFC:
To retrieve a parked call:
1. Choose one of the following:
— Press the Transfer soft key.
— Press the Conference soft key.
2. Dial the Call Park FFC.
3. To use an alternate DN from the System
Park DN or your own DN, dial the DN
where you want to park the call.
Otherwise, proceed to step 4.
4. Choose one of the following:
— Press the Transfer soft key.
— Press the Conference soft key.
1. Lift the handset.
2. Press the Park soft key.
3. Dial the DN where you parked the call.
Note: If a parked call is not retrieved
within a specified period of time, it rings
back to your IP Phone or to the
attendant.
or
Trans Conf
or
Trans Conf
Park