Enhancements, Configuration, Enhancements configuration – Nokia 3220 User Manual
Page 49
S e t t i n g s
Copyright © 2005 Nokia. All rights reserved.
49
currently selected access point.
Select
Packet data access point
, and
enter the access point name (APN)
to establish a connection to an
EGPRS network.
You can also set the dial-up service
settings (access point name) on your
PC using the Nokia Modem Options
software. See
p.
. If you
have set the settings both on the PC
and on your phone, the PC settings
are used.
■ Enhancements
This menu is shown only if the phone
is or has been connected to a
compatible mobile enhancement.
Select
Menu
>
Settings
>
Enhancement settings
. You can
select an enhancement menu if the
corresponding enhancement is, or
has been, connected to the phone.
Depending on the enhancement,
select from the following options:
Default profile
— to select the
profile that you want to be
automatically activated when you
connect to the selected
enhancement
Automatic answer
— to set the
phone to answer an incoming call
automatically after 5 seconds. If
Incoming call alert
is set to
Beep
once
or
Off
, automatic answer is off.
Note: Automatic answer
will only be active whilst
"General" profile is active.
Lights
— to set the lights
permanently
On
. Select
Automatic
to set the lights on for 15 seconds
after a key press
Ignition detector
>
On
— to
automatically switch off the phone
approximately 20 seconds after you
switch off the car ignition when the
phone is connected to the full car kit
■ Configuration
You can configure your phone with
settings that are required for certain
services to function correctly. The
services are browser, multimedia
messaging, remote Internet server
synchronization, presence, and
e-mail application. Get the settings
from your SIM card, from a service
provider as a configuration message,
or enter your personal settings
manually. You can store
configuration settings from up to 20
service providers in the phone and
manage them within this menu.
To save the configuration settings
received by a configuration message
from a service provider, see
”Configuration settings service”
p.
.
Select
Menu
>
Settings
>
Configuration settings
and from the
following options: