Nokia 3220 - Manual (Page 48)

S e t t i n g s
48 Copyright © 2005 Nokia. All rights reserved.
Cell info display > On — to receive
information from the network
operator depending on the network
cell used (network service)
Welcome note — to enter a welcome
note to be shown briefly when the
phone is switched on
Operator selection > Automatic —
to set the phone automatically to
select one of the cellular networks
available in your area. With
Manual ,
you can select a network that has a
roaming agreement with your home
network operator.
Confirm SIM service actions — See
”SIM services” p. 71 .
Help text activation — to select
whether the phone shows help texts
Start-up tone — to select whether
the phone plays a start-up tone
when the phone is switched on
■ Connectivity
You can define the settings for
packet data dial-up connections.
Packet data (EGPRS)
Enhanced general packet radio
service (EGPRS), packet data, is a
network service which allows mobile
phones to send and receive data over
an Internet protocol (IP)-based
network. It enables wireless access
to data networks such as the
Internet.
The applications that may use packet
data are MMS, browsing sessions, e-
mail, remote SyncML, Java
application downloading, and the PC
dial-up.
To define how to use the service,
select
Menu > Settings >
Connectivity > Packet data >
Packet data connection .
Select When needed to set the
packet data connection to be
established when an application
needs it. The connection will be
closed when the application is
terminated.
Select Always online to set the
phone to automatically connect to
an packet data network when it is
switched on.
indicates a packet data
connection.
Modem settings
You can connect the phone using a
data cable connection to a
compatible PC, and use the phone as
a modem to enable packet data
connectivity from the PC.
To define the settings for
connections from the PC, select
Menu > Settings > Connectivity >
Packet data > Packet data
settings > Active access point ,
activate the access point you want
to use, and select
Edit active access
point . Select Alias for access point ,
and enter a nick name for the