Nokia 3220 - Manual (Page 30)

M e s s a g e s
30 Copyright © 2005 Nokia. All rights reserved.
■ Flash messages
Flash messages are text messages
that are instantly displayed upon
reception.
Write a message
Select Menu > Messages > Create
message > Flash message . Write
your message. The maximum length
of a flash message is 70 characters.
To insert a blinking text into the
message, select
Options > Insert
blink char. to set a marker. The text
after the marker blinks until a
second marker is inserted.
Receive a message
A received flash message is not
automatically saved. To read the
message, select
Read . To extract
phone numbers, e-mail addresses,
and Web site addresses from the
current message, select
Options >
Use detail . To save the message,
select Save and the folder in which
you want to save the message.
■ Instant messaging (IM)
Instant messaging (network service)
is a way to send short, simple text
messages to online users.
Before you can use instant
messaging, you must subscribe to
the service. To check the availability
and costs, and to subscribe to the
service, contact your service
provider, from whom you also
receive your unique ID, password,
and settings.
To set the required settings for the
instant messaging service, see
Connect. settings in ”Access the
menu” p. 30 . The icons and texts on
the display may vary, depending on
the instant messaging service.
Depending on the network, the
active instant messaging
conversation may consume the
phone battery faster, and you may
need to connect the phone to a
charger.
Access the menu
To access the menu while still
offline, select
Menu > Messages >
Instant messages . If more than one
set of connection settings for the
instant messaging service is
available, select the desired one. If
there is only one set defined, it is
selected automatically.
The following options are shown:
Login — to connect to the instant
messaging service
Saved convers. — to view, erase or
rename the instant messaging
conversations that you have saved
during the instant messaging session
Connect. settings — to edit the
settings needed for messaging and
presence connection