Nautique SPORT NAUTIQUE 216 - Manual (Page 155)

8-12
If your boat’s gelcoat develops a chalky look over a period of time
due to exposure to sun, there are gelcoat buffing and polishing
compounds available at your Correct Craft dealer and marine
supply stores. DO NOT use common household scouring pads or
powders.
If you will be keeping your boat in the water for ANY period of time,
we suggest that the wetted surface of the hull be painted with an
epoxy paint formulated for blister protection.
Teak Care
Teak is a unique wood used for marine applications. It is an open
cell wood that is highly resistant to the dry-rot associated with many
other woods and is also highly resistant to marine organisms. DO
NOT coat the teak on your boat with any kind of varnish or
polyurethane coatings. Teak oils and cleaners are available at
marine supply stores.
When the teak on your boat is new, it has a medium brown color.
After a period of time, exposure to the elements will cause it to turn
a weathered gray color. If you want to refinish the teak, we suggest
you purchase a teak cleaner from a reputable marine supply store.
Follow the instructions on the teak refinishing bottles. You should
use these products in an open space with eye protection, rubber
gloves and good ventilation. Be very careful to avoid spilling these
products on any part of your body or boat.
NOTICE
Teak sealers and cleaners can be harmful to other materials. Make
sure you thoroughly remove any spills or excess. DO NOT varnish
teak as the natural oils in teak will cause poor adhesion.
Section 8
Correct Craft, Inc.
DO NOT store rags used to clean or treat
teak on your boat. Store or dispose rags properly
ashore.
! WARNING
Nautique Sport Sec 8.qxd 11/19/04 4:11 PM Page 8-12