Nautique SPORT NAUTIQUE 216 - Manual (Page 104)

4-35
Controls and Indicators
Sport
Engine Box Cover Latching/Lifting/Removal (216)
Two rubber latches (A) hold the top of the engine box to the boat.
Pull on the top of these latches and the upper part or the engine
box will release. Lift up on the engine box handle and the gas
shocks will help you lift the engine box. This "clam-shell" design
allows you to check the engine without lifting the entire engine
box. You can leave the top open to dry the bilge.
To remove the engine box cover, open the cover to expose the
anchoring pins (B). Pull the pins out and slide the cover back.
When reinstalling the cover, make sure the aft latches and pins are
secured in their anchoring position.
CORC040
A
B
The engine box cover is a machinery
guard. DO NOT operate your boat without the cover
closed and in place unless you are performing a check
or maintenance. BE CAREFUL to keep your hands,
clothing, hair and any other body parts away from any
moving parts. Contact with any moving parts on the
engine will cause injury.
! WARNING
Nautique Sport Sec 4.qxd 11/19/04 4:02 PM Page 35