Nautique SPORT NAUTIQUE 216 - Manual (Page 151)

8-8
7. Replace the safety wire.
NOTICE
Replace the safety wire. It is very important. Use a stainless steel
safety wire of at least .032 gauge.
Through-Hull Fittings
All fittings that actually pass through the hull on the wetted surface
are caulked in. These are not serviceable and must not be tampered
with.
CORC110
Section 8
Correct Craft, Inc.
Nautique Sport Sec 8.qxd 11/19/04 4:11 PM Page 8-8