Controls and indicators – Nautique SPORT NAUTIQUE 216 User Manual
Page 108
4-39
Engine Cooling Water Intake Valve
Your boat is equipped with a valve (seacock) on the engine cooling
water intake. The handle has a slide mechanism to prevent the
valve from being shut off inadvertently. The valve is used to shut off
the water supply in the event a hose failure or water leakage occurs.
The valve is open when the yellow handle is in-line with the valve
body and the valve is closed when the handle is perpendicular to
the valve body. Leave the valve open at all times unless an
emergency condition requires you to close the valve to stop a leak
or the possibility of a leak.
Typical Valve
216 Sport
- The valve is located on the starboard side of the
transmission. The handle is yellow.
210, 226 Sport
- The valve is located on the port side of the
transmission. The handle lever is red.
210 and 226 Valve
CORC106
WATER
VALVE
CORC067
OFF
ON
STRAINER
WATER
VALVE
Controls and Indicators
Sport
Nautique Sport Sec 4.qxd 11/19/04 4:02 PM Page 39