National Instruments NI 5422 User Manual
National Instruments Generators
Table of contents
Document Outline
- NI 5422 Specifications
- Contents
- CH 0 (Channel 0 Analog Output)
- Figure 1. Normalized Passband Flatness, Direct Path
- Figure 2. Normalized Passband Flatness, Low-Gain Amplifier Path
- Figure 3. Normalized Passband Flatness, High-Gain Amplifier Path
- Figure 4. Pulse Response, Low-Gain Amplifier Path with a 50 W Load
- Figure 5. Recommended Sine Wave Frequency Versus Amplitude
- Figure 6. 10 MHz Single-Tone Spectrum, Direct Path, 200 MS/s (Typical)
- Figure 7. 10.00001 MHz Single-Tone Spectrum, Low-Gain Amplifier Path, 200 MS/s (Typical)
- Figure 8. Total Harmonic Distortion, Direct Path
- Figure 9. Total Harmonic Distortion, Low-Gain Amplifier Path
- Figure 10. Total Harmonic Distortion, High-Gain Amplifier Path
- Figure 11. Intermodulation Distortion, 200 kHz Separation (Typical)
- Figure 12. Direct Path, Two-Tone Spectrum (Typical)
- Sample Clock
- Onboard Clock
- Phase-Locked Loop (PLL) Reference Clock
- CLK IN (Sample Clock and Reference Clock Input)
- PFI 0 and PFI 1
- DIGITAL DATA & CONTROL (DDC)
- Start Trigger
- Markers
- Arbitrary Waveform Generation Mode
- Calibration
- Power
- Software
- Environment
- Safety, Electromagnetic Compatibility, and CE Compliance
- Physical
- Where to Go for Support