Nortel Networks i2021 Series User Manual

Page 42

i2021 ISDN Teleset

After the entire number is viewed, press the edit key and edit the number
as above.

To originate a call using the Speed Dial key, press the button that has
been programmed with the number to be dialed. The Teleset will
automatically select a line and dial the number. An alternate operation is
to go off-hook on the handset and then press the Speed Dial key.

SETTING THE ALARM TIME
Five different alarm clock ring patterns can be set. Setting the alarm is
done as shown below. You may also wish to look at the flowchart for a
graphic representation of the programming sequence. You can set an
alarm to sound at a specific time, or at the same time every day. A
maximum of ten alarms may be set.

NOTE: If the telephone number to be edited is longer than 24

digits, arrows will indicate there are more digits to
display. Use the volume control key to view the entire
number before editing.

NOTE: Speed Dial keys can be programmed to send

touchtones after a call has been connected. This is
useful for programming voice mail passwords or pager
numbers. After entering the voice mail telephone
number, insert 2 or 3 pauses and enter you password.

NOTE: If you dial “9” for a Centrex or PBX outside line, or a “1”

to access long distance, include that digit.