Nortel Networks i2021 Series - Manual (Page 29)

i2021 ISDN Teleset
23
ASSIGNING THE CONFERENCE/TRANSFER/DROP/CALL
FORWARD/CALL PICKUP FEATURES MANUALLY
The following sections describe how you assign these features.
1. Press MENU, MORE, MORE, Config, SetKey, SetFA. The display
shows as follows:
2. Press FA to scroll the features on the display.
3. The following features: PkUp (Call Pickup), FwdOn (Call Forwarding),
Confr (Conference), Transfer, Drop, and MsgWait (Message
Waiting) are enabled as you scroll though them. If the switch is set for
EWSD
®
the Transfer key may not be present.
4. To change or set the Conf key, scroll to the conference key, press
Change and enter the feature number using the touchtone keypad.
5. Press Save. Repeat this procedure for Transfer and Drop and other
features.