Nortel Networks Industrial Handset - Manual (Page 26)

DECT Industrial Handset User Guide Issue 02
Galway M1 Design Support
26
6.10 Ringer Volume
The 5-step ringer volume option enables users to set the loudness of the bleep and
ringing tones.
To set the ringer volume:
1. Enter the Set Profile display and use the or key to select ringer vol..
2. Press the key to enter the ringer volume display. Use the or keys to
increase or decrease the volume. The handset will produce the ringer sound in the
increased or decreased loudness setting. It is also possible to switch the ringer
volume OFF in this setting.
3. Press the key to set the volume. The handset will return to the Set profile
display.
6.11 Key Click Tone
The key click tone setting determines whether or not the handset bleeps every time a
key is pressed. The key click tones can be switched ON or OFF.
To switch the key click tones ON/OFF:
1. Enter the Set Profile display and use the or key to select key click.
2. Press the key to enter the key click display and use the or key to
select ON or OFF and the loudness of the key click. The display will show the
loudness of key click or key click OFF.
3. Press the key to return to the Set Profile Menu.